foamsheet

Note: We do not ship outside the U.S.A. Click here for more information.

EPP Foam

EPP is an acronym for Expanded Polypropylene. EPP has found many uses in the model airplane world and is a light weight and much more durable material compared to rigid foams such as white beaded EPS.

We stock EPP foam in 1.3# or 1.9# density. Our 1.3# EPP is by far the most popular and commonly used for wings and flying surfaces. The 1.9# EPP is generally used for fuselages, but can also be used for wings. The 1.9# EPP carves and sands more easily and is a more rigid material compared to 1.3#, but it is heavier.

EPP structures are typically covered with Color Tape, or a low temperature heat shrink covering like Ultracote. EPP should not be used for surfaces that you intended to sheet with balsa wood. Rigid EPS foams are better suited for covering with sheet balsa.

EPP is a molded material and has a surface "skin" on 1 or more sides. The molded surface is not as true as a cut surface, and this "skin" averages about 1/8" deep. The "skin" is a higher density than the core of the material and does not cut the same with a hot wire as the core of the sheet. This fact should be taken into account when selecting sheet thickness.

We stock 1.3# density EPP in White and Black. 1.9# EPP is available only in white.

The sizes listed below are nominal. The sheets you receive may vary slightly in size.

prices effective Nov 15, 2008

Sheet Size 1.3# 1.9# Order Min.

2.0 x 24 x 36 $18.50 $24.50 2

2.5 x 24 x 36 $21.00 $30.00 2

3.0 x 24 x 36 $25.00 $36.50 1

4.0 x 24 x 36 $35.75 $48.50 1

5.0 x 24 x 36 $41.00 $60.00 1

2.0 x 18 x 48 $18.50 $24.50 2

2.5 x 18 x 48 $21.00 $30.00 2

3.0 x 18 x 48 $25.00 $36.50 1

4.0 x 18 x 48 $35.75 $48.50 1

5.0 x 18 x 48 $41.00 $60.00 1

2.0 x 36 x 48 $36.50 $48.50 1

2.5 x 36 x 48 $41.50 $59.50 1

3.0 x 36 x 48 $49.00 $72.00 1

4.0 x 36 x 48 $71.00 $96.00 1

5.0 x 36 x 48 $81.00 $119.00 1

Thin Sliced EPP Sheets (1.3# density only)

3mm x 24 x 36 $3.50 N/A 5*

4mm x 24 x 36 $4.00 N/A 5*

6mm x 24 x 36 $6.00 N/A 5*

Notes: *There is a minimum order requirement of 5 sheets of 3, 4, and 6mm. Sizes can be mixed within a 5 sheet minimum order.

Shipping Notes:

Carriers:

We typically ship via Fedex Ground or Fedex Home Delivery within the continental U.S. We can also ship via the U.S. postal service to Alaska, Hawaii and Puerto Rico.

Shipping Costs:

To get an exact shipping cost, we will need to prepare a quote based on the items you order, your location, and carrier. See our ordering process below to do this.

Example shipping costs:

The table below will give some idea of shipping costs, based on the package size and your location.

We have listed 4 examples.

TSEPP Box: This 26x15x12 box can hold up to 15 thin sliced EPP foam sheets.

4x24x36: 2 sheets of 2x24x36. Two sheets of 2x18x48 will ship for this same price.

10x24x36: Up to (5) 2x24x36 sheets or (4) 2.5x24x36 sheets. Also applies to 18x48 sizes.

5x36x48: (1) 5x36x48 sheet.

TSEPP Box 4x24x36 10x24x36 5x36x48

Boston $12.00 $12.00 $30.00 $75.00

Chicago $12.00 $12.00 $30.00 $75.00

Dallas/Housto $ 9.00 $9.00 $22.50 $67.50

Los Angeles $12.00 $12.00 $30.00 $75.00

Miami $12.00 $12.00 $30.00 $75.00

New York $12.00 $12.00 $30.00 $75.00

Portland OR $12.00 $12.00 $30.00 $75.00

San Jose $12.00 $12.00 $30.00 $75.00

Seattle $12.50 $12.50 $33.00 $78.00

NOTE: The shipping prices listed above are examples. Your costs will depend on the size of your order, and your exact shipping location.

Thin sliced EPP Sheets:

We now stock 3mm, 4mm and 6mm EPP foam in 24" x 36" sheets. The foam is 1.3# density white EPP that has been machine blade sliced to either 3mm or 4mm. Prices are listed above. There is a minimum order of 5 sheets which can be of mixed sizes, either 3mm, 4mm or 6mm.

The 3mm sheets will vary in thickness from 2.8mm (0.112") to 3.4mm (0.134"). The 4mm sheets will vary in thickness from 3.8mm (0.150") to 4.2mm (0.165"). The 6mm sheets will vary in thickness from 5.5mm (0.216") to 6.5mm (0.256").

Thin sliced EPP sheets are available only in a 24" by 36" size and only in 1.3# density. Black and White are available.

We can hot wire cut EPP to any thickness, but hot wire cut sheets are slightly heavier than sliced sheets and are more expensive due to the machine time requirements.

How to Order:

Get a Quote:

Send us an email with a list of sizes, densities and color of the EPP foam that you wish to purchase. Please include your shipping address and phone number so we can calculate shipping costs for your order.

We quote your job:

We will return a quote to you via Email in 1 or 2 days. Your quote will include shipping costs and instructions for placing your order.

Place your order:

Once you have a quote, you can place an order with us by supplying payment or payment information.

Credit Cards: We accept Visa, MasterCard and Discover. Due to the nature of our business, we do not have online ordering, but you can call us at 512 670 2107 with your credit card information. You can also fax this information to 512 670 2218.

Checks or Money Orders: You can send checks and Money Orders to FlyingFoam.com, 100 W Pflugerville Pkwy Suite 103, Pflugerville, TX 78660.

Paypal: You can send payment via PayPal to bob@flyingfoam.com

Cash: Call us at 512 670 2107 to make arrangements.

OR ---- You can now Order Online!

Click Here to visit our Online Store.